|
 |
GageMax Gear CNC Gear Measuring Solutions from Carl Zeiss |
GageMax Gear for CNC Gear Measurement
|
 |
|
Technical Data of GageMax Gear for Gear Application
| Work piece diameter gears (Max.) |
700 mm |
| Max shaft length |
700 mm |
| Module range |
0.5 – 100 mm (smaller on request) |
| Maximum face width |
500 mm |
| Helix angle |
89.9° |
| Number of axes |
4 |
| Resolution measuring head |
0,01μm. |
| Resolution of incremental scales |
0.2 μm |
| Dimensions Approx. |
500x 1800 x 3000 |
|
|
| Features : |
• |
Technology from Zeiss |
• |
VAST XT Gold 3D Scanning Probe Head |
• |
Robust Design |
• |
Small Foot Print |
• |
Auto Probe Changer with Basic Machine |
• |
26 piece stylus kit with basic machine |
• |
axis alignment software in basic scope |
• |
3 jaw Chuck with basic machine |
|
| Machine technology : |
• |
Reliable drive technology |
• |
Completely covered guide ways |
• |
Integrated damping system |
• |
Compensation of guide way errors (CAA corrected) |
• |
Temprature range : 15 to 40 degree |
|
| Technology from Carl Zeiss, the market leader : |
• |
C99 controller technology |
• |
VAST XXT scanning sensor |
• |
Gear Pro & CALYPSO measuring software |
• |
Fast startup |
• |
No special installation or power requirements |
• |
More than 2000 Gear Pro users worldwide |
|
|
Gear Pro Features in basic machine:
| Profile, Lead, (Fa, ffa, FHa, Ca for Profile) (Fb, ffbFHbCb For Lead) |
Pitch & Runout (Single Flank / Double Flank / Self Centering method)(FP, fp, fuFr, Fpz/8 for Pitch) |
| Tooth Thickness Variation, (Ra) |
Tooth Thickness, (Ss) |
| Gap Width, (Es) |
Dimension over 1-ball /2-balls, (Mdk) |
| Dimension over 2-pins, (Mdk) |
Span width over k teeth, (Wk) |
| Output of eccentricity corrected values |
Measurement of Tip & Root Diameter (da, df) |
| Missing Teeth |
Tooth Segments |
| Interrupted Lead |
Calculation of deviation in Axial, |
| Topography presentation |
Tooth / Gap Measurement |
| Raster Lines or Horizontal marker lines |
Evaluation according to standards: DIN 3962, DIN 5480, ISO 1328, AGMA 2000-A88, ANSI B92.1, JIS B1702, customer specific standards |
|
|
 |
 |
|
|
|
